Tree Marking Paint

Product information

Forrest-dedicated spray paints for particular display.

Forest Industry : Suitable for marking preserved trees, felled tree, logs, pulp, railroad wood, etc.
General use : Ideal for locations requiring clear and specific markings such as operational area floors, asphalt, accident sites, etc.

Please remove dust, oil, rust, fungi, etc. on the coated face before spraying.
Sufficiently shake the container before use.
Spray at a distance of 20~30cm.
Instead of applying thickly all at once, please apply thinly by overlapping 2-3 times with a 10-minute interval.
When the contents remain after use, spray to allow only gas to come out for about 2 seconds by turning the container upside down, and properly cover the cap.
Use after checking whether it matches with the use for the coated object prior to use.

Do not use for purposes other than intended.
Keep out of reach of children.
If the contents come into contact with eyes or skin, rinse thoroughly with clean water and consult a doctor if irritation occurs.
Do not spray directly on food or the face. Do not inhale or ingest.
This is a flammable product using high-pressure gas. Please observe the following precautions:
1. Do not spray toward an open flame.
2. Do not use near heaters, stoves, or other fire sources.
3. Do not use in indoor areas where fire is present.
4. Do not store in areas where temperature exceeds 40℃.
5. Ensure proper ventilation after use in enclosed spaces.
6. Ensure no gas remains in the can before disposal. Never dispose of in fire.
7. Do not store in enclosed spaces.
8. Spray performance may be poor at temperatures below 5℃.
9. Keep away from direct sunlight or heat, as it may cause an explosion.
10. Check for nearby sparks, and after spraying a certain amount, allow time for the gas to disperse before spraying again.