※ Characteristics and effects are as follows.

• Paintable.
• Excellent release properties.
• Suitable for precision molds.
• Non-corrosive to molds.
• Leaves no residue.
• RoHS(6 type hazardous substances) undetected.

• Epoxy resin, phenolic resin, melamine resin, PVC resin, etc.

• Remove foreign substances on the coating surface and injection residues.
• Spray from a distance of about 20 cm from the coating surface.
• Depending on the work situation, finish by wiping or brushing with a cloth.

• Please observe the following points when storing and using the product and discard.
  1. Even though it is low-flammable, keep away from fire to spray it.
  2. Provide good ventilation for long-time use.
  3. Keep it in the well-ventilated place below 40℃.
  4. Do not use it toward fire.
  5. Do not use near heater or stove.
  6. Do not use in the room using fire.
  7. Do not keep it in the place above 40℃.
  8. Provide ventilation to use it in the closed room.
  9. Do not throw it away into fire.
  10. Punch the can to throw it away.
  11. Do not keep it in the closed place.
  12. Spraying may not work well below 5℃.