Tree Marking Paint

Product information

Forrest-dedicated spray paints for particular display.

Forest Industry : Suitable for marking preserved trees, felled tree, logs, pulp, railroad wood, etc.
General use : Ideal for locations requiring clear and specific markings such as operational area floors, asphalt, accident sites, etc.

Please remove dust, oil, rust, fungi, etc. on the coated face before spraying.
Sufficiently shake the container before use.
Spray at a distance of 30~40cm.
Instead of applying thickly all at once, please apply thinly by overlapping 2-3 times with a 10-minute interval.
When the contents remain after use, spray to allow only gas to come out for about 2 seconds by turning the container upside down, and properly cover the cap.
Use after checking whether it matches with the use for the coated object prior to use.

Spray it after testing. (It can make negative effect depending on materials or properties of surface)
To keep aerosol can unused for a long-time, hold it upside down and spray till no more liquid comes out to make a nozzle unblocked.
Do not keep it inside of vehicles.
Keep it away from children.
Do not use it for other purposes.
Use it at outdoor or a well-ventilated place.
Do not spray directly onto human body, animal or food.
As this is an inflammable product using high pressure gas, keep the following cautions carefully.
Do not spray directly toward open flame.
Do not use it near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not use it in an environment where there are explosive or inflammable materials.
Store the product in places where the temperature does not exceed 40℃.
After used in enclosed areas, be sure to ventilate.
Do not throw into a fire.
After use, throw it away after checking and removal the remaining gas in the container.
Do not store it in enclosed area.
Below 5℃, injection power may be poor.