• Surface coloring : Metal, plastic, cement, house, furniture, ornament.
• For repair painting : Wood, steel structure.

• Please remove dust, oil, rust, fungi, etc. on the coated face before spraying.
• Sufficiently shake the container upon use.
• Spray at a distance of 20~30cm.
• Apply thin overlap coating for 2~3 times at an interval of 10 minutes in parallel direction with the coated face as in the , rather than thick coating at one go.
• When the contents remain after use, spray to allow only gas to come out for about 2 seconds by turning the container upside down, and properly cover the cap for storage.

※ Use after checking whether the color and the spray state are correct matching the use for the coated object prior to use.

※ Do not store inside a car or trunk during summer season.

• Spray it after testing. (It can make negative effect depending on materials or properties of surface)
• To keep aerosol can unused for a long-time, hold it upside down and spray till no more liquid comes out to make a nozzle unblocked.
• Do not keep it inside of vehicles.
• Keep it away from children.
• Do not use it for other purposes.
• Use it at outdoor or a well-ventilated place.
• Do not spray directly onto human body, animal or food.
• As this is an inflammable product using high pressure gas, keep the following cautions carefully.
• Do not spray directly toward open flame.
• Do not use it near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Do not use it in an environment where there are explosive or inflammable materials.
• Store the product in places where the temperature does not exceed 40℃.
• After used in enclosed areas, be sure to ventilate.
• Do not throw into a fire.
• After use, throw it away after checking and removal the remaining gas in the container.
• Do not store it in enclosed area.
• Below 5℃, injection power may be poor.