PRODUCTS
Creates people and the future
PRODUCTS
Packaging unit
Steel Can 20kg
Product information
YECOA YZP-700 is a rust inhibition coating agent made of zinc silicate powder.
- Galvanizing coating agent using high-purity, fine-particle zinc powder and inorganic silicate binder
- No risk of fire due to welding impurities upon welding
- Excellent durability due to formation of high-adhesion galvanized coating for vessel, bridge, vehicle, power generator, etc.
Usage
- Vessel: Bottom and connection part of vessel, heat exchanger, water tank, drainage tank, marine equipment & facility.
- Bridge: Rust inhibition for pier, wire, rope, bridge, bolts, nuts, & welded part.
- Vehicle: Muffler, body, lower body, fuel tank inlet, welded parts of heavy equipment, parking facility.
- Power generation: Electrical facility, telegraph transmission power, broadcasting facility, antenna, steel tower, street lamp.
- Building: Underground buried pipe, elbow, steel structure, fence, etc.
How to use
- Always wear safety equipment before work.
- Clean the dust, oil contents and grease on the metal surface. (Using our metal cleaner, they are removed easily)
- Shake up and down lightly before use.
- Spray twice or three times to make thick film formed.
- Spray it about 20~30cm away from target object.
- Apply it again depending on desired thickness.
- Time for tack free drying is about 2∼3 minutes.
- Complete hardening takes 24 hours.
- Use the target after complete hardening.
Precautions
- Please observe the following points when storing and using the product and discard.
- Even though it is low-flammable, keep away from fire to spray it.
- Provide good ventilation for long-time use.
- Keep it in the well-ventilated place below 40℃.
- Provide good ventilation for long-time use.
- Do not use near heater or stove.
- Do not use in the room using fire.
- Do not keep it in the place above 40℃.
- Provide ventilation to use it in the closed room.
- Do not keep it in the closed place.